Waste Water Facilities

Waste Water Facilities
X-O Neutralizer (XR) and Concentrated X-O Odor Neutralizer (XC) are used to remove persistent odors of every variety so that no problem odors or product odors remain. All natural X-O eliminates odor on the molecular level with its plant-based solution mixed with de-ionized water. X-O products are non-toxic and biodegradable which means you won't have to worry about polluting the environment or exposing workers or anyone else to harmful chemicals. Concentrated X-O Odor Neutralizer (XC) contains double the active ingredients of X-O Neutralizer (XR).

Headworks: Spray nozzle applications –  the dilution rate is 50 parts water to 1 part XC.

Clarifiers: If dome Covered – spray nozzle application within the dome – dilution rate is 50 parts water to 1 part XC. Uncovered – set up Lechler nozzles at 20 foot intervals on the rail – dilution rate variable – starting at a 50 to 1 and extended by steps of 50 until best dilution rate is determined.

Dewatering/Grit Extraction Buildings: Set up Lechler nozzles spaced 20’ apart, 10’ high – dilution rate: variable 50 to 150 parts water to 1 part XC.

Air Scrubbers: Charge rate of 1 part XC to 500 parts water. Thoroughly flush out previously used chemicals before charging with X-O solutions. (X-O performance is negatively impacted by strong oxidizing agents).

Trickle Filter Towers: Charge rate of 1 part XC to 150 parts water.

Sludge Lagoons: Set Lechler spray nozzles every 20 feet in an “L” configuration on two sides of the lagoon. Dilution rate: 1 part XC to 500 parts water.

Lift Stations: Set nozzles in the wet well – dilution rate: 1 part XC to 100 parts water.

Note: The above dilution rates are for XC and are a conservative guide. XR is half the strength of XC, therefore twice as much product will probably be used.

Go to our web site, http://xocorp.com/  to see Material Safety Data Sheets and other technical information.